Typical Enabling Conditions
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
| All of the following conditions are met | - |
| Soak time | 7 hours or more |
| Auxiliary battery voltage | 10.5 V or higher |
| Time after engine start | Less than 20 seconds |
| Intake air temperature at hybrid system ready-to-drive | -10°C (14°F) or higher |
| Intake air temperature sensor circuit fail (P0112, P0113) | Not detected |
| No. 2 engine coolant temperature sensor circuit fail (P00B3, P00B4) | Not detected |
| Soak timer fail (P2610) | Not detected |