LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (Power Window Control System (Hybrid) - Diagnostic Codes & Symptom Tests) >> POWER WINDOW CONTROL SYSTEM (for HV Model) >> Rear Power Window RH Auto Up / Down Function does not Operate with Rear Power Window Switch RH [06/2018 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If the power window regulator motor assembly (for rear RH door) has been replaced with a new one, initialize the power window control system.

    Refer to INITIALIZATION [06/2018 - ]

  • Check that power window system customize settings "RR Window Auto Up" and "RR Window Auto Down" are set to "ON" before performing the following procedure.

    Refer to CUSTOMIZE PARAMETERS [06/2018 - ]

  • After the catch protection function has operated, the auto up function will not operate the first time the power window auto up switch is operated. The auto up function will operate normally after the first power window switch operation.

HINT: 

If the pulse sensor built into the power window regulator motor assembly (for rear RH door) is malfunctioning, the power window control system will enter fail-safe mode. The remote up and down and auto up and down functions cannot be operated during fail-safe mode. However, the power window can be closed by holding the rear power window regulator switch assembly (for RH door) at the auto up position, and opened manually by pushing down the rear power window regulator switch assembly (for RH door).

Refer to FAIL-SAFE CHART [06/2018 - ]

scientia non olet · About LEMON Manuals