DTC B2313: Glass Position Initialization Incomplete [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM INITIALIZATION (APPLICABLE LOCATION)

Turn the power switch on (IG).

Initialize the power window regulator motor assembly.

Refer to INITIALIZATION [06/2018 - ]

HINT:

Initialize the power window regulator motor assembly that has DTC B2313 stored in its ECU.

Result

Proceed to
NEXT

Result:

See step 2

CHECK DTC OUTPUT

Turn the power switch off.
Wait for at least 10 seconds, and then turn the power switch on (IG).

Check for DTCs.

Body Electrical > D-Door Motor > Trouble Codes

Body Electrical > P-Door Motor > Trouble Codes

Body Electrical > RL-Door Motor > Trouble Codes

Body Electrical > RR-Door Motor > Trouble Codes

HINT:

Check for DTCs for the power window regulator motor assembly that had DTC B2313 stored in its ECU.

DTC B2313 is not output.

Result

Result	Proceed to
OK	A
NG (Driver door power window)	B
NG (Front passenger door power window)	B
NG (Rear LH door power window)	C
NG (Rear RH door power window)	C

Result:

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED)

Result:

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Door or Front Passenger Door). Refer to REMOVAL [06/2018 - 08/2020] , or refer to REMOVAL [08/2020 - 08/2021] , or refer to REMOVAL [08/2021 - 09/2022] , or refer to REMOVAL [09/2022 - ]

Result:

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH Door or Rear RH Door). Refer to REMOVAL [06/2018 - 08/2020] , or refer to REMOVAL [08/2020 - 08/2021] , or refer to REMOVAL [08/2021 - 09/2022] , or refer to REMOVAL [09/2022 - ]