LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Engine Control System (A25A-FXS) - Diagnostic Codes (08 Of 20)) >> SFI System >> DTC P0335-2A: Crankshaft Position Sensor "A" Signal Stuck in Range; DTC P0335-31: Crankshaft Position Sensor "A" No Signal [06/2018 - 08/2020] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
ALL

Both of the following conditions are met -
Hybrid control module judge Engine running
Lost communication with hybrid vehicle control ECU assembly (U0293) Not detected
P0335 (CASE 1)

All of the following conditions are met -
Auxiliary battery voltage Higher than 6 V
Crankshaft position sensor voltage 0.3 to 4.7 V
Power switch On (IG)
P0335 (CASE 2)

All of the following conditions are met -
Auxiliary battery voltage Higher than 6 V
Crankshaft position sensor voltage 0.3 to 4.7 V
Starter Off
Engine speed (Top dead center) 600 rpm or higher
Engine speed (30°CA) 600 rpm or higher