Typical Enabling Conditions
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
STUCK MONITOR
| All of the following conditions are met | - |
| Fuel pressure sensor (for high pressure side) circuit malfunction (P0192, P0193) | Not detected |
| High pressure fuel pump malfunction (P1235) | Not detected |
| Engine coolant temperature sensor malfunction (P0117, P0118) | Not detected |
| Barometric pressure sensor malfunction (P106C, P2228, P2229) | Not detected |
| Auxiliary battery voltage | 11 V or higher |
| Fuel cut | Off |
| Injection mode | NOT PFI (Port fuel injection) |
CORRELATION MONITOR WITH BAROMETRIC PRESSURE
| All of the following conditions are met | - |
| Fuel pressure sensor (for high pressure side) circuit malfunction (P0192, P0193) | Not detected |
| High pressure fuel pump malfunction (P1235) | Not detected |
| Engine coolant temperature sensor malfunction (P0117, P0118) | Not detected |
| Barometric pressure sensor malfunction (P106C, P2228, P2229) | Not detected |
| Soak timer malfunction (P2610) | Not detected |
| Auxiliary battery voltage | 8 V or higher |
| Power switch | Off |
| Soak time | 5, 7 or 9.5 hours |
| Atmospheric pressure | 76 kPa(abs) [11 psi(abs)] or higher |