Black Screen [06/2018 - 09/2022]: Procedure
WARNING: This page is about a different car, the 2022 Lexus ES 300h, 2021 Lexus ES 300h, 2020 Lexus ES 300h, and 2019 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HARNESS AND CONNECTOR (REAR TELEVISION CAMERA ASSEMBLY - MULTI-DISPLAY ASSEMBLY)
See step 1
Result
Proceed to OK NG Result:
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
Result:
OK
See step 2
- INSPECT MULTI-DISPLAY ASSEMBLY (CA+, CGND)
See step 2
Result
Proceed to OK NG Result:
NG
REPLACE MULTI-DISPLAY ASSEMBLY. Refer to REMOVAL [06/2018 - 08/2020] , or refer to REMOVAL [08/2020 - 09/2022]
Result:
OK
See step 3
- INSPECT MULTI-DISPLAY ASSEMBLY (V+, GND1)
See step 3
Result
Proceed to OK NG Result:
NG
REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to REMOVAL [06/2018 - 09/2022]
Result:
OK
See step 4
- REPLACE MULTI-DISPLAY ASSEMBLY
- Replace the multi-display assembly with a new or known good one.
Refer to REMOVAL [06/2018 - 08/2020] , or refer to REMOVAL [08/2020 - 09/2022]
- Check that the parking assist monitor system operates normally.
OK
Parking assist monitor system operates normally.
Result
Proceed to OK NG
Result:
OK
END
Result:
NG
REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to REMOVAL [06/2018 - 09/2022]
- Replace the multi-display assembly with a new or known good one.