Caution / Notice / Hint
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Before troubleshooting, make sure that the kick door control sensor is not damaged.
- Before troubleshooting, be sure to read Precautions for Hands Free Power Trunk Lid.
Refer to PRECAUTION [06/2018 - 08/2021]
- Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Refer to REGISTRATION [06/2018 - 10/2019] , or refer to REGISTRATION [10/2019 - 09/2022]
- The power trunk lid system uses the CAN communication system and LIN communication system. First, confirm that there is no malfunction in the CAN communication system and LIN communication system. Refer to the How to Proceed with Troubleshooting procedure.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - 08/2021]
- Before troubleshooting, make sure that the "Kick Sensor Function" customize setting is set to "ON" (initial setting is "ON").
- After performing work, using the Techstream, read the Data List item "Kick Sensor Connection" and check that the kick door control sensor is connected.
- Inspect the fuses for circuits related to this system before performing the following procedure.
- If the luggage closer motor assembly has been removed and installed or replaced, or if any of the connectors has been disconnected, initialize the power trunk lid system.
Refer to INITIALIZATION [06/2018 - ]
- Check that the smart access system (for Entry Function) is normally before performing the following procedure.