LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Power Trunk Lid System (Hybrid) - Diagnostic Codes & Symptom Tests) >> POWER TRUNK LID SYSTEM (for HV Model) >> Power Trunk Lid does not Operate Using Any Switches [06/2018 - 08/2021] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If the main body ECU (multiplex network body ECU) is replaced, refer to the Registration.

    Refer to REGISTRATION [06/2018 - 10/2019] , or refer to REGISTRATION [10/2019 - 09/2022]

  • The power trunk lid system uses the CAN communication system. First, confirm that there is no malfunction in the CAN communication system. Refer to the How to Proceed with Troubleshooting procedure.

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - 08/2021]

  • This check is possible only when the "PBD Power Operation" customization setting using the Techstream is set to "ON" (initial setting is "ON").

    Refer to CUSTOMIZE PARAMETERS [06/2018 - 08/2021]

  • Inspect fuses for circuits related to this system before performing the following procedure.
  • If the luggage closer motor assembly has been removed and installed or replaced, or if any of the connectors has been disconnected, initialize the power trunk lid system.

    Refer to INITIALIZATION [06/2018 - ]

scientia non olet · About LEMON Manuals