System Description [06/2018 - 09/2022]
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- LIN COMMUNICATION SYSTEM DESCRIPTION
The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication such as when there is an open or short in a communication line, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.
HINT:
- Each component has a fail-safe function which operates in the event of a malfunction to protect the system and allow communication between other components to continue.
- In the following table, "◦" indicates that the function applies, and "-" indicates that it does not.
DOOR BUS LINESComponent Master Control LIN Communication DTC Output Function Main Body ECU (Multiplex Network Body ECU) ◦ ◦ Power Window Regulator Motor Assembly (Driver Door) - - Power Window Regulator Motor Assembly (Front Passenger Door) - - Power Window Regulator Motor Assembly (Rear LH Door) - - Power Window Regulator Motor Assembly (Rear RH Door) - - Multiplex Network Master Switch Assembly - - Sliding Roof ECU (Sliding Roof Drive Gear Sub-assembly) - - Kick Door Control Sensor* - - - *: w/ Power Trunk Lid System
CERTIFICATION BUS LINESComponent Master Control LIN Communication DTC Output Function Certification ECU (Smart Key ECU Assembly) ◦ ◦ Steering Lock ECU (Steering Lock Actuator or Upper Bracket Assembly) - - ID Code Box (Immobiliser Code ECU) - -