LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Engine Cooling System (A25A-FKS) - Service Information) >> FLOW SHUTTING VALVE (for Heater) >> Inspection [08/2020 - ] >> Procedure

Inspection [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FLOW SHUTTING VALVE (WATER BY-PASS HOSE ASSEMBLY) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 22 to 28 Ω

      If the result is not as specified, replace the flow shutting valve (water by-pass hose assembly).

scientia non olet · About LEMON Manuals