LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Safety Connect System (Hybrid) - Diagnostic Codes & Symptom Tests) >> SAFETY CONNECT SYSTEM (for HV Model) >> Green And Red Indicators Do Not Come On When IG-On [06/2018 - 10/2019] >> Procedure

Green And Red Indicators Do Not Come On When IG-On [06/2018 - 10/2019]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. HEALTH CHECK 
    1. Turn the power switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the power switch on (IG) and wait for 10 seconds.
    4. Turn the Techstream on.
    5. Perform "Health Check" using the Techstream and check that Telematics (Safety Connect) is listed on "Health Check Result".

      Refer to HEALTH CHECK [06/2018 - 10/2019]

      Result

      Result Proceed to
      "Telematics" is displayed on the Techstream A
      "Telematics" is not displayed on the Techstream B

    Result: 

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [06/2018 - 10/2019] 

    Result: 

    See step  2

  2. CHECK DTC 
    1. Turn the power switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the power switch on (IG) and wait for 10 seconds.
    4. Turn the Techstream on.
    5. Check current DTCs and history DTCs.

      Refer to DTC CHECK / CLEAR [06/2018 - 10/2019]

      Result

      Result Proceed to
      DTCs are not output A
      DTCs are output B

    Result: 

    CHECK FOR INTERMITTENT PROBLEMS. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ] 

    Result: 

    GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2018 - 10/2019]