LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Safety Connect System (Hybrid) - Diagnostic Codes & Symptom Tests) >> SAFETY CONNECT SYSTEM (for HV Model) >> Green And Red Indicators Blink Simultaneously [06/2018 - 10/2019] >> Procedure

Green And Red Indicators Blink Simultaneously [06/2018 - 10/2019]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHANGE SUBSCRIPTION MODE 
    1. Turn the power switch on (IG).
    2. Push the manual (SOS) switch.
    3. The vehicle will issue a voice prompt: "To activate, please press the button again within 5 seconds."
    4. Push the manual (SOS) switch and a beep will be emitted.
    5. The telematics service provider will send an End Call command and the manual (SOS) switch green indicator will illuminate.
    6. A voice prompt will state: "Activation Complete." (This may take up to 3 minutes.)
    7. Turn the power switch off.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. CHECK SUBSCRIPTION MODE 
    1. Turn the power switch on (IG).
    2. Confirm that the manual (SOS) switch red indicator illuminates for 2 seconds and turns off and the manual (SOS) switch green indicator illuminates and remains on.

      Refer to SYSTEM DESCRIPTION [06/2018 - 10/2019]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END