LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Audio / Video System (Hybrid) - Diagnostic Codes (2 Of 2) & Symptom Tests) >> AUDIO AND VISUAL SYSTEM (for HV Model) >> Satellite Radio Broadcast cannot be Received [06/2018 - 09/2022] >> Procedure

Satellite Radio Broadcast cannot be Received [06/2018 - 09/2022]: Procedure

WARNING: This page is about a different car, the 2022 Lexus ES 300h, 2021 Lexus ES 300h, 2020 Lexus ES 300h, and 2019 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SURROUNDINGS 
    1. Check if the vehicle is in an environment where reception is difficult due to something blocking the area above the vehicle.
      GTY429423Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Example *b In a tunnel
      *c In a building *d Under an overpass
      *e On a forest or tree-lined path *f Between tall buildings
      *g Under a cliff or overhang - -

      HINT: 

      If the area above the vehicle is blocked, such as when in a building or tunnel, reception may not be possible.

      OK

      Area above vehicle is not blocked.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    END (MOVE VEHICLE TO LOCATION WHERE RECEPTION IS BETTER) 

    Result: 

    OK 

    See step  2

  2. CHECK RADIO RECEIVER ASSEMBLY 
    1. Check if CH001 (free broadcast) can be received.

      OK

      CH001 can be received.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    See step  6

    Result: 

    OK 

    See step  3

  3. CHECK DISPLAY SETTING 
    1. Check the display screen.

      Result

      Result Proceed to
      "Updating" is displayed. A
      "-----" is displayed. B
      None of the displays above are shown. C

    Result: 

    THERE IS NO SONG/PROGRAM TITLE OR ARTIST NAME/FEATURE ASSOCIATED WITH CHANNEL AT THAT TIME 

    Result: 

    See step  6

    Result: 

    See step  4

  4. CHECK CONTRACT CONDITIONS 
    1. Check if the pay-type contract has been extended, or if the contract period has ended.

      OK

      Pay-type contract is valid.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    TO RECEIVE PAY-TYPE BROADCASTS, CONTRACT MUST BE MADE WITH SATELLITE RADIO COMPANY 

    Result: 

    OK 

    See step  5

  5. PERFORM ACTIVATION REFRESH 
    1. Perform activation refresh by referring to the satellite radio company web site (https://care.siriusxm.com/retailrefresh_view.action).

      OK

      Malfunction disappears.

      HINT: 

      The XM radio ID that is necessary to perform activation refresh is displayed when CH000 is selected on the satellite radio.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END 

    Result: 

    NG 

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [06/2018 - 10/2019]  , or refer to  PROBLEM SYMPTOMS TABLE [10/2019 - 08/2020]  , or refer to  PROBLEM SYMPTOMS TABLE [08/2020 - 08/2021]  , or refer to  PROBLEM SYMPTOMS TABLE [08/2021 - 09/2022] 

  6. CHECK DISPLAY 
    1. Check the display screen.

      Result

      Result Proceed to
      "SAT Check Antenna" is displayed. A
      "SAT No Signal" is displayed. B
      "Loading" is displayed.
      "SAT Channel Off Air" is displayed. C
      After "---" is displayed, display automatically switches to CH001. D
      "SAT Ch Unauthorized" is displayed. E
      "SAT Chan Unavailable" is displayed.
      None of the displays above are shown.

    Result: 

    END (MOVE VEHICLE TO LOCATION WHERE RECEPTION IS BETTER) 

    Result: 

    CHANNEL IS CURRENTLY NOT BEING BROADCASTED. BROADCAST CAN BE LISTENED TO OR VIEWED WHEN IT IS BACK ON AIR. (CHECH WITH RADIO STATION) 

    Result: 

    CHANNEL BROADCAST HAS ENDED (CHECH WITH RADIO STATION) 

    Result: 

    See step  11

    Result: 

    See step  7

  7. REPLACE ANTENNA CORD SUB-ASSEMBLY 
    1. Replace the antenna cord sub-assembly with a new or known good one and check if radio broadcasts can be received normally.

      Refer to REMOVAL [06/2018 - 08/2021] , or refer to REMOVAL [08/2021 - 09/2022]

      OK

      Radio broadcasts can be received normally.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END 

    Result: 

    NG 

    See step  8

  8. REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY 
    1. Replace the No. 2 antenna cord sub-assembly with a new or known good one and check if radio broadcasts can be received normally.

      Refer to REMOVAL [06/2018 - 08/2021] , or refer to REMOVAL [08/2021 - 09/2022]

      Result

      Proceed to
      OK
      NG

      OK

      Radio broadcasts can be received normally.

    Result: 

    OK 

    END 

    Result: 

    NG 

    See step  9

  9. REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY 
    1. Replace the No. 3 antenna cord sub-assembly with a new or known good one and check if radio broadcasts can be received normally.

      Refer to REMOVAL [06/2018 - 08/2021] , or refer to REMOVAL [08/2021 - 09/2022]

      OK

      Radio broadcasts can be received normally.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END 

    Result: 

    NG 

    See step  10

  10. REPLACE TELEPHONE ANTENNA ASSEMBLY 
    1. Replace the telephone antenna assembly with a new or known good one and check if radio broadcasts can be received normally.

      Refer to REMOVAL [06/2018 - 08/2021] , or refer to REMOVAL [08/2021 - 09/2022]

      OK

      Radio broadcasts can be received normally.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END 

    Result: 

    NG 

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [06/2018 - 10/2019]  , or refer to  PROBLEM SYMPTOMS TABLE [10/2019 - 08/2020]  , or refer to  PROBLEM SYMPTOMS TABLE [08/2020 - 08/2021]  , or refer to  PROBLEM SYMPTOMS TABLE [08/2021 - 09/2022] 

  11. CHECK CURRENTLY SELECTED CHANNEL 
    1. Check if CH000 is currently selected.

      OK

      CH000 is selected.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END (CH000 HAS NO SOUND. SELECT ANOTHER CHANNEL.) 

    Result: 

    NG 

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [06/2018 - 10/2019]  , or refer to  PROBLEM SYMPTOMS TABLE [10/2019 - 08/2020]  , or refer to  PROBLEM SYMPTOMS TABLE [08/2020 - 08/2021]  , or refer to  PROBLEM SYMPTOMS TABLE [08/2021 - 09/2022]