LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Lubrication System (A25A-FKS) - Service Information) >> Oil Pump >> Removal [08/2020 - 08/2021] >> Procedure

Removal [08/2020 - 08/2021]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TIMING CHAIN COVER ASSEMBLY 

    Refer to REMOVAL [08/2020 - 08/2021]

  2. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 55

  3. REMOVE OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 56

  4. REMOVE ENGINE OIL LEVEL SENSOR 

    See step  7

  5. REMOVE OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 58

  6. REMOVE ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 60

  7. REMOVE OIL PUMP ASSEMBLY 
    1. Remove the 3 bolts and oil pump assembly from the stiffening crankcase assembly.
      GTY754233Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 62

scientia non olet · About LEMON Manuals