LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Lubrication System (A25A-FKS) - Service Information) >> Oil Pump >> Installation [08/2020 - ] >> Procedure

Installation [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 6 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 6 [08/2021 - ]

  2. INSTALL STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 7 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 7 [08/2021 - ]

  3. INSTALL OIL PUMP ASSEMBLY 
    1. Install the oil pump assembly to the stiffening crankcase assembly with the 3 bolts.

      Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

  4. INSTALL OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 9 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 9 [08/2021 - ]

  5. INSTALL ENGINE OIL LEVEL SENSOR 

    See step  1

  6. INSTALL OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 11 [08/2021 - ]

  7. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 12 [08/2021 - ]

  8. INSTALL TIMING CHAIN COVER ASSEMBLY 

    Refer to INSTALLATION [08/2020 - 08/2021] , or refer to INSTALLATION [08/2021 - ]

scientia non olet · About LEMON Manuals