LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Lubrication System (A25A-FKS) - Service Information) >> Oil Pressure Switching Valve >> Removal [08/2020 - ] >> Procedure

Removal [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 13 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 13 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 13 [09/2022 - ]

  2. REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY 
    1. Disconnect the oil pressure control valve assembly connector.
      GTY771427Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the timing chain cover assembly.
scientia non olet · About LEMON Manuals