LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Control System (A25A-FKS) - Service Information) >> Camshaft Oil Control Valve >> On-Vehicle Inspection [08/2020 - ] >> Procedure

On-Vehicle Inspection [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 

    Refer to REMOVAL [08/2020 - ] 

  2. INSPECT CAMSHAFT TIMING VALVE ASSEMBLY 
    1. Check the stroke of the plunger in the center of the camshaft timing valve assembly.
      GTY948838Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A Type A
      *B Type B
      *a Plunger

      Standard Stroke

      2.2 mm (0.0866 in.) or more

      If the result is not as specified, replace the camshaft timing valve assembly.

  3. INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 

    Refer to INSTALLATION [08/2020 - ] 

scientia non olet · About LEMON Manuals