Installation [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL BATTERY STATE SENSOR ASSEMBLY
1. Engage the 2 claws to install the battery state sensor assembly to the battery current sensor holder.
2. Connect the battery state sensor assembly connector.
3. Install the battery state sensor assembly to the auxiliary battery and tighten the nut.
  Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf)
4. Connect the No. 2 frame wire to the battery state sensor assembly with the nut.
  Torque: 7.6 N.m (77 kgf/cm, 67 in.lbf)
  
  NOTE:
  When disconnecting the engine wire, some systems need to be initialized after the engine wire is reconnected.
  
  Refer to INITIALIZATION [06/2018 - 10/2019] , or refer to INITIALIZATION [10/2019 - 08/2020] , or refer to INITIALIZATION [08/2020 - 08/2021] , or refer to INITIALIZATION [08/2021 - 09/2022] , or refer to INITIALIZATION [09/2022 - ]
5. Return the luggage compartment trim cover RH to its original position.