LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Lighting System (Ext) (Hybrid) - Diagnostic Codes (2 Of 2) & Symptom Tests (1 Of 2)) >> LIGHTING SYSTEM (for HV Model) >> DTC B2439: Headlight LH Circuit; DTC B243A: Headlight RH Circuit [08/2021 - ] >> Description

DTC B2439: Headlight LH Circuit; DTC B243A: Headlight RH Circuit [08/2021 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

The headlight ECU sub-assembly LH and headlight ECU sub-assembly RH internally boost the power supply voltage to ensure a constant supplied current for the lo/hi beam LED of their respective headlight.

By monitoring the LED power supply voltage, abnormal current and malfunctions can be detected.

FOR LED TYPE TURN SIGNAL LIGHT

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B2439 Headlight LH Circuit Detection condition: 
  1. All of the following conditions are met:
    • Power switch on (IG)
    • Low beam headlights on

Malfunction status: 
  • Headlight unit assembly malfunction
  • Open/short in Lo/Hi beam circuit

Malfunction duration: 
  1. 10 seconds or more
  • Headlight ECU sub-assembly LH
  • Headlight unit assembly LH
AFS
B243A Headlight RH Circuit Detection condition: 
  1. All of the following conditions are met:
    • Power switch on (IG)
    • Low beam headlights on

Malfunction status: 
  • Headlight unit assembly malfunction
  • Open/short in Lo/Hi beam circuit

Malfunction duration: 
  1. 10 seconds or more
  • Headlight ECU sub-assembly RH
  • Headlight unit assembly RH
AFS (Sub)
FOR BULB TYPE TURN SIGNAL LIGHT

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B2439 Headlight LH Circuit Detection condition: 
  1. All of the following conditions are met:
    • Power switch on (IG)
    • Low beam headlights on

Malfunction status: 
  • Headlight assembly malfunction
  • Open/short in Lo/Hi beam circuit

Malfunction duration: 
  1. 10 seconds or more
  • Headlight ECU sub-assembly LH
  • Headlight assembly LH
HL AutoLeveling
B243A Headlight RH Circuit Detection condition: 
  1. All of the following conditions are met:
    • Power switch on (IG)
    • Low beam headlights on

Malfunction status: 
  • Headlight assembly malfunction
  • Open/short in Lo/Hi beam circuit

Malfunction duration: 
  1. 10 seconds or more
  • Headlight ECU sub-assembly RH
  • Headlight assembly RH
HL AutoLeveling (Sub)