LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 184 (Sliding Roof System (Hybrid) - Diagnostics - Introduction) >> SLIDING ROOF SYSTEM (for HV Model) >> Customize Parameters [06/2018 - ] >> Customize Parameters [06/2018 - ]

Customize Parameters [06/2018 - ]

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZE SLIDING ROOF SYSTEM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Power Window.
      5. Select the setting by referring to the table below.

        Power Window 

        Tester Display Description Default Setting ECU
        Door Key P/W Up Function to close the power windows and sliding roof using the mechanical key OFF 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Door Key P/W Down Function to open the power windows and sliding roof using the mechanical key OFF 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit Function to open the power windows and sliding roof using the wireless transmitter OFF 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
      6. Enter the following menus: Customize Setting / Slide Roof.
      7. Select the setting by referring to the table below.

        Slide Roof 

        Tester Display Description Default Setting ECU
        Door Key Related Operation Function to select tilt up or slide open of sliding roof key-linked function Slide 0:Slide, 1:Tilt Sliding roof ECU (Sliding roof drive gear sub-assembly)
        Wireless Key Related Operation Function to select tilt up or slide open of sliding roof wireless transmitter-linked function Slide 0:Slide, 1:Tilt Sliding roof ECU (Sliding roof drive gear sub-assembly)
        Front SW Auto Operation Function to enable/disable auto operation ON 0:OFF, 1:ON Sliding roof ECU (Sliding roof drive gear sub-assembly)
      8. Enter the following menus: Customize Setting / Security.
      9. Select the setting by referring to the table below.

        Security 

        Tester Display Description Default Setting ECU
        Slide Roof Open Warning Function to enable or disable the sliding roof open warning ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
scientia non olet · About LEMON Manuals