LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Meter / Gauge System (Hybrid) - Diagnostics - Introduction (2 Of 2)) >> METER / GAUGE SYSTEM (for HV Model) >> Customize Parameters [07/2019 - 08/2020] >> Customize Parameters [07/2019 - 08/2020]

Customize Parameters [07/2019 - 08/2020]

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZE METER / GAUGE SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    HINT: 

    The following items can be customized.

    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Warning or Display.
      5. Select the setting by referring to the table below.

        Warning 

        Tester Display Description Default Setting ECU
        Flasher Sound Volume Adjust Function to change the flasher sound volume Medium $02:Large,$00:Medium,$01:Small Combination meter assembly
        Suggestion Service Function Function to change the suggestion service display setting ON 00:OFF, 01:Only Parked, 11:ON Main body ECU (Multiplex network body ECU)

        Display 

        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Adjust Function to change the ODO display time after the power switch is turned off 30s $00:30s,$01:60s,$02:600s,$03:OFF Combination meter assembly
    2. Customizing with the multi-display
      1. Turn the power switch on (IG).
      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Suggestion Function.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Suggestion Function On Function to change the suggestion service display setting On, On (when the vehicle is stopped), Off Main body ECU (Multiplex network body ECU)
    3. Customizing with the multi-information display
      1. Turn the power switch on (IG).
      2. Select the settings tab on the multi-information display and set the customize settings.
        Display Detail Description Setting ECU
        Lane Center - Lane tracing assist function setting On/Off Forward recognition camera
        Steering Assist - Lane departure alert steering control function setting On/Off Forward recognition camera
        Alert - Lane departure alert method setting Vibration/Buzzer Forward recognition camera
        Sensitivity - Lane departure alert sensitivity setting High/Std. Forward recognition camera
        PCS - Pre-collision system setting On/Off Forward recognition camera
        Sensitivity - Pre-collision system sensitivity setting 1/2/3 Forward recognition camera
        BSM - Blind spot monitor system setting On/Off Blind spot monitor sensor RH (B)
        PKSA Clearance sonar Intuitive parking assist setting On/Off Clearance warning ECU assembly
        RCTA Rear crossing traffic alert setting On/Off Blind spot monitor sensor RH (B)
        RCD Rear camera detection setting On/Off Rear Television Camera Assembly
        Volume Parking support alert system volume setting 1/2/3 Clearance warning ECU assembly
        RCTA - Rear crossing traffic alert setting On/Off Blind spot monitor sensor RH (B)
        ICS - Parking support brake system setting On/Off Clearance warning ECU assembly
        HUD Brightness/Position Brightness Brightness setting for headup display - Meter mirror sub-assembly
        Position Position setting for headup display -
        Units - Display units setting km/miles Related ECUs
        Vehicle Settings LDA Warning Vehicle sway warning function setting On/Off Forward recognition camera
        Sensitivity Sway warning sensitivity setting High/Std./Low
        BSM Brightness Outer rear view mirror indicator brightness setting Bright/Dim Blind spot monitor sensor RH (B)
        Sensitivity Blind spot monitor system sensitivity setting 1/2/3/4
        RCTA - Rear crossing traffic alert volume setting 1/2/3 Blind spot monitor sensor RH (B)
        RSA RSA Road sign assist system setting On/Off Forward recognition camera
        Excess Speed Excess speed notification method setting No Notification/Only Visual/Visual & Audible
        Notification Level Excess speed notification level setting 10 km/h (5 MPH), 5 km/h (3 MPH), 2 km/h (1 MPH)
        No Overtaking No overtaking notification method setting No Notification/Only Visual/Visual and Haptic
        Other Signs Others traffic sign notification method setting No Notification/Only Visual/Visual & Audible
        HUD Tachometer Settings Display setting for headup display Blank/Hybrid System/Tachometer Meter mirror sub-assembly
        HUD Driving Support Navigation Display setting for headup display On/Off
        Driving Assist Display setting for headup display On/Off
        Compass Display setting for headup display On/Off
        Audio Display setting for headup display On/Off
        HUD Rotation Headup display image calibration (rotation calibration) -
        KICK SENSOR Kick sensor function setting On/Off Luggage closer motor assembly
        TPWS Tire pressure warning system initialization Set Pressure Tire Pressure Warning ECU and Receiver
        Select to start tire pressure warning system sensor ID codes registration Change Wheel Set
        Scheduled Maintenance Scheduled maintenance data reset Yes/No ECM
        Meter Setting Language Display language setting *C Related ECUs
        Units Display units setting *C
        Speed Meter Speedometer display setting Digital/Analog/Digital and Analog Combination meter assembly
        Drive Info 1/2 *A Average Fuel Economy Displayed drive information display item setting After Reset/After Start/After Refuel
        Average Speed Displayed drive information display item setting After Reset/After Start
        Elapsed Time Displayed drive information display item setting After Reset/After Start
        Distance Displayed drive information display item setting Range/After Start
        Other Displayed drive information display item setting Blank
        Current Fuel Economy Displayed drive information display item setting Bar Type
        Clock 12H/24H setting and clock adjustment 24H/12H
        Adjusts the hour*B -
        Adjusts the minute*B -
        AM/PM setting*B AM/PM
        Pop-Up Display TbT Navigation Interrupt display setting for navigation system-linked On/Off
        Telephone Interrupt display setting for phone-linked On/Off
        Audio Feedback Interrupt display setting for audio system-linked On/Off
        Volume Feedback Interrupt display setting for volume operation On/Off
        Adjust Brightness Meter illumination level display On/Off
        Color Theme color setting white/silver
        Meter Setting Tachometer Settings Tachometer display setting On(Self-Changing)/Tachometer(Always)/HV Meter(Always) Combination meter assembly
        EV driving indicator light EV driving indicator light display setting On/Off
        Default Settings Reset the combination meter settings to the default setting Yes/No Related ECUs
        1. *A: Drive information displayed differs depending on the display settings
        2. *B: Setting can be changed when clock is malfunctioning or GPS signal is not received
        3. *C: Content differs depending on destination market

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

scientia non olet · About LEMON Manuals