Typical Enabling Conditions
WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
STUCK MONITOR
| All of the following conditions are met | - |
| Fuel pressure sensor (for high pressure side) circuit malfunction (P0192, P0193) | Not detected |
| High pressure fuel pump malfunction (P1235) | Not detected |
| Engine coolant temperature sensor malfunction (P0117, P0118) | Not detected |
| Barometric pressure sensor malfunction (P106C, P2228, P2229) | Not detected |
| Battery voltage | 11 V or higher |
| Fuel cut | Off |
| Injection mode | NOT PFI (Port fuel injection) |
CORRELATION MONITOR WITH BAROMETRIC PRESSURE
| All of the following conditions are met | - |
| Fuel pressure sensor (for high pressure side) circuit malfunction (P0192, P0193) | Not detected |
| High pressure fuel pump malfunction (P1235) | Not detected |
| Engine coolant temperature sensor malfunction (P0117, P0118) | Not detected |
| Barometric pressure sensor malfunction (P106C, P2228, P2229) | Not detected |
| Soak timer malfunction (P2610) | Not detected |
| Battery voltage | 8 V or higher |
| Engine switch | Off |
| Soak time | 5, 7 or 9.5 hours |
| Atmospheric pressure | 76 kPa(abs) [11 psi(abs)] or higher |