LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine Mechanical System (A25A-FKS) - Service Information (1 Of 3)) >> Front Crankshaft Oil Seal >> Removal [08/2020 - 08/2021] >> Procedure

Removal [08/2020 - 08/2021]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    Refer to REMOVAL [08/2020 - 08/2021]

  2. REMOVE V-RIBBED BELT 

    Refer to PROCEDURE - Step 5

  3. REMOVE CRANKSHAFT PULLEY ASSEMBLY 

    Refer to PROCEDURE - Step 18

  4. REMOVE TIMING CHAIN COVER OIL SEAL 
    1. Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain cover oil seal.
      GTY767346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      NOTE:

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

scientia non olet · About LEMON Manuals