LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Engine Lubrication System (A25A-FXS) - Service Information) >> Oil Pressure Switching Valve >> Removal [06/2018 - ] >> Procedure

Removal [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 12 [06/2018 - 08/2020] , or refer to PROCEDURE - Step 12 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 12 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 12 [09/2022 - ]

  2. REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY 
    1. Disconnect the oil pressure control valve assembly connector.
      GTY761263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the timing chain cover assembly.
scientia non olet · About LEMON Manuals