LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Engine Cooling System (A25A-FXS) - Service Information) >> Flow Shutting Valve >> Inspection [06/2018 - ] >> Procedure

Inspection [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FLOW SHUTTING VALVE (WATER BY-PASS HOSE ASSEMBLY) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY767557Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Flow Shutting Valve (Water By-pass Hose Assembly))

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 22 to 28 Ω

      If the result is not as specified, replace the flow shutting valve (water by-pass hose assembly).

scientia non olet · About LEMON Manuals