LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Electronically Controlled Brake System (Hybrid) - Diagnostic Codes (5 Of 5) & Symptom Tests) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> Brake Hold Standby Indicator Light Circuit [06/2018 - 09/2022] >> Description

Brake Hold Standby Indicator Light Circuit [06/2018 - 09/2022]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

The brake hold standby indicator light turns on if brake hold control is possible when the following conditions required for operation standby are met and the brake hold switch (No. 3 combination switch assembly) is turned on while the power switch is on (IG).

  1. Conditions required for operation standby:
    1. The driver side door is closed.
    2. The driver side seat belt is fastened.
    3. The system is normal.
scientia non olet · About LEMON Manuals