DTC C1434: Steering Angle Sensor Output [06/2018 - ]: Description
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
Steering angle sensor signals are input to the skid control ECU (brake booster with master cylinder assembly) via the CAN communication system.
HINT:
When a malfunction occurs in the communication line to the steering angle sensor, U0126 (Lost Communication With Steering Angle Sensor Module) is output.
If a DTC related to the CAN communication line is output, first troubleshoot the CAN communication line.
DTCs may be stored if one of the following occurs:
- Steering angle sensor zero point malfunction.
- Steering angle sensor signal malfunction.
- Steering angle sensor installation abnormality.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|---|
| C1434 | Steering Angle Sensor Output | 701 | When communication is normal, a steering angle sensor malfunction is detected. |
|
Does not come on | VSC DTC |