DTC C1259: HV Control System Regenerative Malfunction; DTC C1310: HV System Malfunction [08/2020 - ]: Procedure

1. Check if a hybrid control system DTCs are output.

   for Nickel Metal Hydride Battery: Refer to DTC CHECK / CLEAR [06/2018 - ]

   for Lithium-ion Battery: Refer to DTC CHECK / CLEAR [08/2020 - ]

   Powertrain > Hybrid Control > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output.	A
   DTCs are output.	B

Result: 

B 

INSPECT HYBRID CONTROL SYSTEM 

for Nickel Metal Hydride Battery: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]

for Lithium-ion Battery: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2020 - ]

Result: 

A 

See step  2

1. Check if a motor generator control system DTCs are output.

   for Nickel Metal Hydride Battery: Refer to DTC CHECK / CLEAR [06/2018 - ]

   for Lithium-ion Battery: Refer to DTC CHECK / CLEAR [08/2020 - ]

   Powertrain > Motor Generator > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output.	A
   DTCs are output.	B

Result: 

B 

INSPECT MOTOR GENERATOR CONTROL SYSTEM 

for Nickel Metal Hydride Battery: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]

for Lithium-ion Battery: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2020 - ]

Result: 

A 

See step  3

1. Check if a SFI system DTCs are output.

   Refer to DTC CHECK / CLEAR [06/2018 - 08/2021] , or refer to DTC CHECK / CLEAR [08/2021 - 09/2022] , or refer to DTC CHECK / CLEAR [09/2022 - ]

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output (for Lithium-ion Battery).	A
   DTCs are not output (for Nickel Metal Hydride Battery).	B
   DTCs are output.	C

Result: 

B 

See step  5

Result: 

C 

INSPECT SFI SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ] 

Result: 

A 

See step  4

1. Check if a hybrid battery system DTCs are output.

   Refer to DTC CHECK / CLEAR [08/2020 - ]

   Powertrain > HV Battery > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output.	A
   DTCs are output.	B

Result: 

B 

INSPECT HYBRID BATTERY SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2020 - ] 

Result: 

A 

See step  5

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [06/2018 - ]

   Chassis > ABS/VSC/TRAC > Clear DTCs 

2. Turn the power switch off.
3. Turn the power switch on (IG).
4. Check if the same DTC is output.

   Refer to DTC CHECK / CLEAR [06/2018 - ]

   Chassis > ABS/VSC/TRAC > Trouble Codes 

   Result

   Result	Proceed to
   DTCs C1259 and/or C1310 are output.	A
   DTCs other than C1259 and C1310 are output.	B
   DTCs are not output.	C

Result: 

A 

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY. Refer to  REMOVAL [06/2018 - 08/2021]  , or refer to  REMOVAL [08/2021 - 09/2022]  , or refer to  REMOVAL [09/2022 - ] 

Result: 

B 

REPAIR CIRCUITS INDICATED BY OUTPUT DTCS. Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2020 - 08/2021]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2021 - ] 

Result: 

C 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]