LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Electronically Controlled Brake System (Hybrid) - Diagnostic Codes (2 Of 5)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C1257: Power Supply Drive Circuit [06/2018 - ] >> Procedure

DTC C1257: Power Supply Drive Circuit [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Clear the DTCs.

      Refer to DTC CHECK / CLEAR [06/2018 - ]

      Chassis > ABS/VSC/TRAC > Clear DTCs 

    2. Turn the power switch off.
    3. Turn the power switch on (IG).
    4. Check if the same DTC is output.

      Refer to DTC CHECK / CLEAR [06/2018 - ]

      Chassis > ABS/VSC/TRAC > Trouble Codes 

      Result

      Result Proceed to
      DTC C1257 is output. A
      DTCs C1241, C1242 and/or C1253 are output. B

    Result: 

    A 

    REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY. Refer to  REMOVAL [06/2018 - 08/2021]  , or refer to  REMOVAL [08/2021 - 09/2022]  , or refer to  REMOVAL [09/2022 - ] 

    Result: 

    B 

    REPAIR CIRCUITS INDICATED BY OUTPUT DTCS. Refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2018 - 07/2019]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [07/2019 - 08/2020]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2020 - 08/2021]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2021 - ] 

scientia non olet · About LEMON Manuals