Monitor Description
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
The skid control ECU (brake booster with master cylinder assembly) monitors the value of the accumulator pressure using the accumulator pressure sensor.
If any of the following conditions are met for a certain amount of time, the skid control ECU (brake booster with master cylinder assembly) judges that the accumulator pressure is low and illuminates the MIL and stores this DTC.
- The accumulator pressure does not increase when the pump motor is operated.
- The accumulator pressure is not a specific value or more after starting the skid control ECU (brake booster with master cylinder assembly).
- The accumulator pressure is less than a specific value.