Monitor Description
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
The skid control ECU (brake booster with master cylinder assembly) monitors the drive voltage and current of the linear solenoids (SLA, SLR, SSA and SGH). Based on the monitored information, if any of the following abnormal conditions are detected, the MIL is illuminated and a DTC is stored.
- A malfunction of the current monitor is detected.
- Based on the duty cycle, the monitored current value is considerably low.
- An open circuit is detected.
- Based on the duty cycle, the monitored current value is considerably high.
- A current leakage is detected.
- When the monitored current value increases to a value that is not possible when normal.