LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Engine Control System (A25A-FKS) - Diagnostic Codes (02 Of 12)) >> SFI System >> DTC P0088-00: Fuel Rail / System Pressure - Too High [08/2020 - 08/2021] >> Description

DTC P0088-00: Fuel Rail / System Pressure - Too High [08/2020 - 08/2021]: Description

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0087-00.

Refer to DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P0088-00 Fuel Rail / System Pressure - Too High Although the ECM is requesting the fuel pump assembly (for high pressure side) to open the spill control valve, fuel pressure increases 3 MPa (30.6 kgf/cm2 , 435 psi) from target pressure for about 10 seconds (1 trip detection logic).
  • Fuel pump assembly (for high pressure side)
  • Fuel pressure sensor (for high pressure side)
  • ECM
Comes on DTC stored SAE Code: P0088