Utility [09/2022 - ]
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 300h, 2024 Lexus ES 250, 2023 Lexus ES 350, and 2023 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- ALL READINESS
HINT:
- With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
- You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the GTS on.
- Clear the DTCs even if no DTCs are stored.
Body Electrical > Clearance Warning > Clear DTCs
- Turn the ignition switch off and wait for 2 minutes or more.
- Turn the ignition switch to ON.
- Perform the DTC judgment driving pattern to run the DTC judgment.
- Enter the following menus: Body Electrical / Clearance Warning / Utility / All Readiness.
Body Electrical > Clearance Warning > Utility
Tester Display All Readiness - Input the DTCs to be confirmed.
- Check the DTC judgment result.
GTS Display Description Normal - DTC judgment completed
- System normal
Abnormal - DTC judgment completed
- System abnormal
Incomplete - DTC judgment not completed
- Perform the driving pattern
If the judgment result shows Incomplete, perform the DTC confirmation driving pattern again.
- Turn the ignition switch off.