LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 450hL >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (2 Of 2) >> Rear Emblem Sensor >> Removal [10/2015 - 08/2019] >> Procedure

Removal [10/2015 - 08/2019]: Procedure

  1. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY 

    Refer to REMOVAL [10/2015 - 03/2018] , or refer to REMOVAL [03/2018 - 08/2019]

  2. REMOVE NO. 4 BACK DOOR WIRE 
    1. Disconnect the connector to remove the No. 4 back door wire.
      GTY674860Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR EMBLEM SENSOR ASSEMBLY 
    1. Disengage the 4 claws and guide to remove the rear emblem sensor assembly.
      GTY623248Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals