LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 450hL >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock System (Service Information) >> Back Door Lock >> Removal [10/2015 - 03/2018] >> Procedure

Removal [10/2015 - 03/2018]: Procedure

  1. REMOVE BACK WINDOW UPPER PANEL TRIM 

    Refer to PROCEDURE - Step 1

  2. REMOVE BACK DOOR TRIM COVER LH 

    Refer to PROCEDURE - Step 2

  3. REMOVE BACK DOOR TRIM COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

  4. REMOVE BACK DOOR LOCK COVER 

    Refer to PROCEDURE - Step 4

  5. REMOVE BACK DOOR TRIM BASE 

    Refer to PROCEDURE - Step 5

  6. REMOVE DOOR PULL HANDLE 

    Refer to PROCEDURE - Step 6

  7. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 3

  8. REMOVE BACK DOOR TRIM PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 8

  9. REMOVE BACK DOOR LOCK ASSEMBLY 
    1. Disconnect the connector.
      GTY642893Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    2. Disengage the clamp.
    3. Remove the 4 bolts.
    4. Disengage the clip to remove the back door lock assembly as shown in the illustration.
scientia non olet · About LEMON Manuals