LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 450hL >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System (Service Information) >> Multi-Display >> Removal [08/2019 - ] >> Procedure

Removal [08/2019 - ]: Procedure

  1. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 17

  2. REMOVE MULTI-DISPLAY ASSEMBLY 
    1. Disconnect each connector.
      GTY963109Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp.
    3. Remove the 2 nuts.
      GTY963114Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 4 clips and remove the multi-display assembly as shown in the illustration.
      GTY961861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  3. REMOVE MULTI-DISPLAY CONTROLLER BRACKET A 

    HINT: 

    Perform this procedure only when replacement of the multi-display controller bracket A is necessary.

    1. Remove the 4 screws and multi-display controller bracket A.
      GTY962169Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 8 Inch Display
      *B for 12.3 Inch Display
scientia non olet · About LEMON Manuals