LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 450h Base >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Service Information) (1 Of 2) >> Rear Upper Arm >> Removal [12/2017 - 08/2019] >> Procedure

Removal [12/2017 - 08/2019]: Procedure

  1. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY 

    Refer to REMOVAL [12/2017 - 03/2018] , or refer to REMOVAL [03/2018 - 08/2019]

  2. REMOVE REAR UPPER CONTROL ARM ASSEMBLY LH 
    1. Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.
      NOTE:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

      GTY620469Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR UPPER CONTROL ARM ASSEMBLY RH 

    HINT: 

    Perform the same procedure as for the LH side.

scientia non olet · About LEMON Manuals