LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 450h Base >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt (Service Information) >> Rear No. 2 Seat Outer Belt Assembly >> Removal [03/2018 - ] >> Procedure

Removal [03/2018 - ]: Procedure

  1. REMOVE REAR NO. 2 SEAT ASSEMBLY 

    Refer to REMOVAL [03/2018 - ]

  2. REMOVE REAR DOOR SCUFF PLATE 

    Refer to PROCEDURE - Step 13 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 13 [08/2019 - ]

  3. REMOVE REAR DOOR INSIDE SCUFF PLATE 

    Refer to PROCEDURE - Step 14 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 14 [08/2019 - ]

  4. REMOVE REAR SEAT OUTER TRACK BRACKET COVER LH (for LH Side) 

    Refer to PROCEDURE - Step 8 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 8 [08/2019 - ]

  5. REMOVE REAR SEAT OUTER TRACK BRACKET COVER RH (for RH Side) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 9 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 8 [08/2019 - ]

  6. REMOVE FRONT DECK SIDE TRIM COVER 

    Refer to PROCEDURE - Step 27 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 27 [08/2019 - ]

  7. REMOVE REAR SEAT SIDE GARNISH 

    Refer to PROCEDURE - Step 28 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 28 [08/2019 - ]

  8. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side) 

    Refer to PROCEDURE - Step 26 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 34 [08/2019 - ]

  9. REMOVE ROPE HOOK ASSEMBLY (for LH Side) 

    Refer to PROCEDURE - Step 30 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 30 [08/2019 - ]

  10. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for LH Side) 

    Refer to PROCEDURE - Step 1 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 1 [08/2019 - ]

  11. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side) 

    Refer to PROCEDURE - Step 34 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 34 [08/2019 - ]

  12. REMOVE ROPE HOOK ASSEMBLY (for RH Side) 

    HINT: 

    Use the same procedure as for the LH side.

  13. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for RH Side) 

    Refer to PROCEDURE - Step 2 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 2 [08/2019 - ]

  14. REMOVE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY (for LH Side) 

    Refer to PROCEDURE - Step 1

  15. REMOVE COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR (for LH Side) 

    Refer to PROCEDURE - Step 1

  16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) 

    Refer to PROCEDURE - Step 34 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 34 [08/2019 - ]

  17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) 

    Refer to PROCEDURE - Step 43 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 43 [08/2019 - ]

  18. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY 

    See step  [03/2018 - 08/2019], or see step  [08/2019 - ]

  19. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY 

    Refer to PROCEDURE - Step 36 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 36 [08/2019 - ]

  20. REMOVE REAR NO. 2 SIDE AIR DUCT (for RH Side) 

    Refer to PROCEDURE - Step 21 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 21 [08/2019 - ]

  21. REMOVE REAR NO. 7 AIR DUCT (for RH Side) 

    Refer to PROCEDURE - Step 23 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 23 [08/2019 - ]

  22. REMOVE REAR NO. 6 AIR DUCT (for RH Side) 

    Refer to PROCEDURE - Step 24 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 24 [08/2019 - ]

  23. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY 
    1. Remove the bolt and disconnect the shoulder anchor of the rear No. 2 seat outer belt assembly.
      GTY837657Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts.
      GTY822427Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 2 guides to remove the rear No. 2 seat outer belt assembly.
scientia non olet · About LEMON Manuals