LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 450h Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation System (Diagnostics - Symptom Tests (2 Of 2) >> Navigation System >> No Feedback Force Provided by Knob of Remote Touch [10/2015 - 08/2019] >> Procedure

No Feedback Force Provided by Knob of Remote Touch [10/2015 - 08/2019]: Procedure

  1. REMOTE TOUCH SELF CHECK (REMOTE TOUCH SWITCH KNOB FEEDBACK FORCE GENERATION CHECK) 
    1. Check the remote touch switch knob feedback force generated.
      GTY633384Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Switch Knob
      *b Movement Direction
      *c Feedback Force
      1. Move the remote touch switch knob up, down, right and left to check that feedback force is generated.

        OK

        Feedback force is generated.

        HINT: 

        When the power switch is turned on (ACC), feedback force is generated. When the power switch is turned off, feedback force is not generated, and the remote touch switch knob will move freely.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPLACE REMOTE OPERATION BOARD. Refer to  DISASSEMBLY [10/2015 - 12/2017]  , or refer to  DISASSEMBLY [12/2017 - 08/2019] 

    Result: 

    OK 

    See step  2

  2. REMOTE TOUCH SELF CHECK (FEEDBACK FORCE FUNCTION) 
    1. Check feedback force function
      1. Move the pointer on the screen by operating the remote touch switch knob and check that the feedback force of the knob changes according to the screen being displayed and the pointer position.

        HINT: 

        Refer to Remote Touch Outline for further information on remote touch switch knob feedback force generated according to the screen being displayed and the pointer position.

        Refer to SYSTEM DESCRIPTION [10/2015 - 08/2019]

        Result

        Result Proceed to
        Feedback force of the remote touch switch knob does not change according to the screen being displayed and the pointer position. A
        Feedback force of the remote touch switch knob changes according to the screen being displayed and the pointer position. B

    Result: 

    REPLACE RADIO RECEIVER ASSEMBLY. Refer to  REMOVAL [10/2015 - 08/2016]  , or refer to  REMOVAL [08/2016 - 03/2018]  , or refer to  REMOVAL [03/2018 - 08/2019] 

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - 08/2016]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2016 - 12/2017]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2017 - 03/2018]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [03/2018 - 08/2019]