LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 450h Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) (2 Of 2) >> Back-Up Light Bulb >> Replacement [10/2015 - ] >> Procedure

Replacement [10/2015 - ]: Procedure

  1. REMOVE NO. 3 BACK DOOR SERVICE HOLE COVER 
    1. Disengage the 5 guides to remove the No. 3 back door service hole cover.
      GTY679934Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE BACK-UP LIGHT BULB 
    1. Turn the back-up light socket and wire with the back-up light bulb as shown in the illustration to disconnect them as a unit.
      GTY623792Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    2. Remove the back-up light bulb from the back-up light socket and wire.
  3. INSTALL BACK-UP LIGHT BULB 
    1. Install the back-up light bulb to the back-up light socket and wire.
    2. Turn the back-up light socket and wire with the back-up light bulb as shown in the illustration to connect them as a unit.
      GTY681621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  4. INSTALL NO. 3 BACK DOOR SERVICE HOLE COVER 
    1. Engage the 5 guides to install the No. 3 back door service hole cover.
      GTY679934Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals