LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 450h Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) (1 Of 2) >> Fog Light Assembly >> Inspection [10/2015 - 08/2019] >> Procedure

Inspection [10/2015 - 08/2019]: Procedure

  1. INSPECT FOG LIGHT ASSEMBLY LH 
    1. Apply auxiliary battery voltage to the fog light assembly LH and check that the light comes on.
      GTY675842Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Fog Light Assembly LH)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 2 (B)
      Auxiliary battery negative (-) → Terminal 1 (E)      		 Fog light comes on

      If the result is not as specified, replace the fog light assembly LH.

  2. INSPECT FOG LIGHT ASSEMBLY RH 
    1. Apply auxiliary battery voltage to the fog light assembly RH and check that the light comes on.
      GTY627691Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Fog Light Assembly RH)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 2 (B)
      Auxiliary battery negative (-) → Terminal 1 (E)      		 Fog light comes on

      If the result is not as specified, replace the fog light assembly RH.

scientia non olet · About LEMON Manuals