DTC B15D3: Stereo Component Amplifier Disconnected [12/2017 - 08/2019]: Description

The radio receiver assembly and stereo component amplifier assembly are connected by AVC-LAN communication lines.

This DTC is stored when an AVC-LAN communication error occurs between the radio receiver assembly and stereo component amplifier assembly.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
B15D3	Stereo Component Amplifier Disconnected	When either of the following conditions is met: The stereo component amplifier assembly is/was not connected while the power switch is/was on (IG) or on (ACC) Communication between the master unit and the stereo component amplifier assembly is not possible when the hybrid control system is started	Stereo component amplifier assembly power source circuit AVC-LAN circuit between radio receiver assembly and stereo component amplifier assembly Stereo component amplifier assembly Radio receiver assembly Harness or connector

HINT:

The radio receiver assembly is the master unit.