Illumination for Panel Switch does not Come on with Tail Switch ON [12/2017 - 08/2019]: Procedure
- CHECK VEHICLE SIGNAL (OPERATION CHECK)
- Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check.
Refer to OPERATION CHECK [12/2017 - 08/2019]
- Check that the display changes between ON and OFF according to the light control switch operation.
OK
Light Control Switch Display Tail or head ON Off OFF HINT:
This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
Result
Proceed to OK NG
Result:
OK
REPLACE RADIO RECEIVER ASSEMBLY. Refer to REMOVAL [12/2017 - 03/2018] , or refer to REMOVAL [03/2018 - 08/2019]
Result:
NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE [12/2017 - 08/2019]
- Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check.