Inspection [03/2018 - ]: Procedure

INSPECT REAR NO. 3 SPEAKER ASSEMBLY

With the speaker installed, check that there is no looseness or other abnormalities.
Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

Measure the resistance of the speaker.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Component without harness connected (Rear No. 3 Speaker Assembly)

Standard Resistance

FOR 12 SPEAKERS

Tester Connection	Condition	Specified Condition
1 - 2	Always	1.6 to 2.4 Ω

FOR 15 SPEAKERS

Tester Connection	Condition	Specified Condition
1 - 2	Always	3.0 to 5.0 Ω

If the result is not as specified, replace the speaker.