Installation [10/2015 - ]: Procedure

INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY
1. Engage the guide.
2. Install the No. 1 amplifier antenna assembly with the bolt.
  Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)
3. Connect each connector.
INSTALL BACK DOOR TRIM PANEL ASSEMBLY
Refer to PROCEDURE - Step 23 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 26 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 28 [08/2019 - ]
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Refer to PROCEDURE - Step 4 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 4 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 3 [08/2019 - ]
INSTALL DOOR PULL HANDLE
Refer to PROCEDURE - Step 25 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 29 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 31 [08/2019 - ]
INSTALL BACK DOOR TRIM BASE
Refer to PROCEDURE - Step 26 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 30 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 32 [08/2019 - ]
INSTALL BACK DOOR LOCK COVER
Refer to PROCEDURE - Step 27 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 31 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 33 [08/2019 - ]
INSTALL BACK DOOR TRIM COVER LH
Refer to PROCEDURE - Step 28 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 33 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 35 [08/2019 - ]
INSTALL BACK DOOR TRIM COVER RH
HINT:

Use the same procedure as for the LH side.
INSTALL BACK WINDOW UPPER PANEL TRIM
Refer to PROCEDURE - Step 30 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 36 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 38 [08/2019 - ]