Check Bus 5 Line for Short to GND [10/2015 - 08/2019]: Description

There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 15 (CA5H) of the network gateway ECU and terminal 4 (CG) of the DLC3, or terminal 16 (CA5L) of the network gateway ECU and terminal 4 (CG) of the DLC3.

Symptom	Trouble Area
No resistance exists between terminal 15 (CA5H) of the network gateway ECU and terminal 4 (CG) of the DLC3, or terminal 16 (CA5L) of the network gateway ECU and terminal 4 (CG) of the DLC3.	Short in CAN main bus line Short in CAN branch line Certification ECU (smart key ECU assembly) Combination meter mirror ECU (headup display) (w/ Headup Display System) Headlight ECU sub-assembly LH (w/ Automatic Headlight Beam Level Control System) Combination meter assembly Air conditioning amplifier assembly Main body ECU (multiplex network body ECU) Network gateway ECU No. 5 CAN junction connector

Symptom

Trouble Area

No resistance exists between terminal 15 (CA5H) of the network gateway ECU and terminal 4 (CG) of the DLC3, or terminal 16 (CA5L) of the network gateway ECU and terminal 4 (CG) of the DLC3.

Short in CAN main bus line
Short in CAN branch line
Certification ECU (smart key ECU assembly)
Combination meter mirror ECU (headup display) (w/ Headup Display System)
Headlight ECU sub-assembly LH (w/ Automatic Headlight Beam Level Control System)
Combination meter assembly
Air conditioning amplifier assembly
Main body ECU (multiplex network body ECU)
Network gateway ECU
No. 5 CAN junction connector