Check Bus 4 Line for Short to GND [08/2019 - ]: Description

There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 22 (CA2H) of the network gateway ECU and terminal 4 (CG) of the DLC3, or terminal 7 (CA2L) of the network gateway ECU and terminal 4 (CG) of the DLC3.

Symptom	Trouble Area
No resistance exists between terminal 22 (CA2H) of the network gateway ECU and terminal 4 (CG) of the DLC3, or terminal 7 (CA2L) of the network gateway ECU and terminal 4 (CG) of the DLC3.	Short in CAN main bus line Short in CAN branch line Network gateway ECU Skid control ECU assembly ECM assembly Tire pressure warning ECU and receiver Absorber control ECU (w/ AVS) Parking brake ECU assembly Power steering ECU assembly Steering sensor Yaw rate sensor assembly Airbag sensor assembly Hybrid vehicle control ECU assembly Occupant detection ECU No. 1 CAN junction connector No. 7 CAN junction connector No. 8 CAN junction connector No. 9 CAN junction connector No. 12 CAN junction connector

Symptom

Trouble Area

No resistance exists between terminal 22 (CA2H) of the network gateway ECU and terminal 4 (CG) of the DLC3, or terminal 7 (CA2L) of the network gateway ECU and terminal 4 (CG) of the DLC3.

Short in CAN main bus line
Short in CAN branch line
Network gateway ECU
Skid control ECU assembly
ECM assembly
Tire pressure warning ECU and receiver
Absorber control ECU (w/ AVS)
Parking brake ECU assembly
Power steering ECU assembly
Steering sensor
Yaw rate sensor assembly
Airbag sensor assembly
Hybrid vehicle control ECU assembly
Occupant detection ECU
No. 1 CAN junction connector
No. 7 CAN junction connector
No. 8 CAN junction connector
No. 9 CAN junction connector
No. 12 CAN junction connector