Caution / Notice / Hint
NOTE:
- After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to PRECAUTION [08/2016 - 12/2017] , or refer to PRECAUTION [12/2017 - 03/2018] , or refer to PRECAUTION [03/2018 - 08/2019] , or refer to PRECAUTION [08/2019 - ]
- After replacing an ultrasonic sensor or the clearance warning ECU assembly, perform the necessary procedures (adjustment, calibration, initialization or registration).
Refer to CALIBRATION [08/2016 - 03/2018] , or refer to CALIBRATION [03/2018 - 08/2019] , or refer to CALIBRATION [08/2019 - ]
- When DTC C1A4B is stored, there may be a malfunction in the lighting system. Inspect the lighting system before performing the following procedure.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - 08/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ]