LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 350L FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats - Service Information (3 Of 3) >> Seat Memory Switch >> Installation [09/2015 - ] >> Procedure

Installation [09/2015 - ]: Procedure

  1. INSTALL SEAT MEMORY SWITCH LH 
    1. Engage the 4 claws to install the seat memory switch LH to the front door trim board sub-assembly LH.
      GTY632861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 46 [09/2015 - 12/2017] Refer to PROCEDURE - Step 46 [12/2017 - ]

  3. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION 

    Refer to PROCEDURE - Step 47 [09/2015 - 12/2017] Refer to PROCEDURE - Step 47 [12/2017 - ]

  4. INSTALL COURTESY LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 2

  5. INSTALL DOOR ARMREST COVER LH 

    Refer to PROCEDURE - Step 49 [09/2015 - 12/2017] Refer to PROCEDURE - Step 49 [12/2017 - ]

  6. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL 

    Refer to PROCEDURE - Step 50 [09/2015 - 12/2017] Refer to PROCEDURE - Step 50 [12/2017 - ]

  7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH 

    Refer to PROCEDURE - Step 52 [09/2015 - 12/2017] Refer to PROCEDURE - Step 52 [12/2017 - ]

  8. INSPECT POWER WINDOW OPERATION 

    Refer to OPERATION CHECK [09/2015 - ]

scientia non olet · About LEMON Manuals