LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 350L FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (2 Of 2) >> Hood >> Reassembly [09/2015 - ] >> Procedure

Reassembly [09/2015 - ]: Procedure

  1. INSTALL HOOD STAY BRACKET LH 

    See step  1

  2. INSTALL HOOD SUPPORT ASSEMBLY LH 

    See step  3

  3. INSTALL HOOD STAY BRACKET RH 

    HINT: 

    Use the same procedure as for the LH side.

  4. INSTALL HOOD SUPPORT ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

  5. CONNECT WASHER HOSE ASSEMBLY 
    1. Engage the 5 clamps to connect the washer hose assembly.
      GTY667974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  7. INSPECT WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  8. ADJUST WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  9. INSTALL HOOD INSULATOR 
    1. Install the hood insulator with 8 new hood insulator clips.
      GTY675437Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. INSTALL HOOD TO RADIATOR SUPPORT SEAL 
    1. Install the hood to radiator support seal with 10 new hood to radiator support seal clips.
      GTY625839Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals